Electric two cutter and V notch CTL

Stack code level two shear two stroke step type transverse shear line

Stack code level two shear two stroke step type transverse shear line

Detailed

CAH (22) -600D stack level transverse shear line
1 head double reel
Inner diameter: 500mm
The maximum diameter of the material: 1200mm
Single head maximum load: 3 tons
Unwinding speed: synchronous adjustment with feed
The unwinding machine adopts synchronous stepless speed regulation to follow the discharge, hydraulic tension, disc brake, electric rotary.
2 material buffer device
With no pit (PIT) feeding buffer, ranging system, component positioning switch etc..
3 feeding machine
The upper and lower feed roller and the length of the roller, servo motor drive. Feeding machine positioning with our patented technology center location, feeder longitudinal integral translation; the encoder length, closed loop servo control; feeding roller is made of polyurethane, the normal use of 0 - 180 m / min, maximum feeding speed of 240 m / min..
4 punch section
O punching and V type punch sets of a set of imported servo motor drive.
V type has the function of lateral step, according to the program automatic adjustment.
Blanking range: along the chip center + 50mm, step up to seven.
V moving mode adopts imported servo motor drive, high efficiency, low noise.
The life of the knife (mould): every blade is not less than 1 million times.
Section 5 shears
Mainly by the +45 - 45 degree degrees shears, shearing machine, transverse sliding discharge and etc..
Shear servo motor drive, high efficiency, low noise.
The life of the knife (mould): every blade is not less than 1 million times.
6 discharge table
Unilateral positioning, transmission belt stepless speed regulation, smooth discharge.
The output motor adopts frequency conversion motor, Toshiba inverter control.
7 point machine
The upper and the lower two layers can be respectively processed, which is mainly composed of a partition device, a magnetic transmission belt and a beating material.
8 unilateral positioning automatic centralized width adjusting device
Across the board to adopt a single position automatic centralized width adjustment mode to adapt to the different width of sheet transfer.
The width adjusting mechanism adopts linear guide rail and ball screw drive.
Across the width of the coordination of centralized width, position indicator display.
9 pneumatic system
The pneumatic control system of the whole system adopts the pneumatic Fuzhou control system of Taiwan, which is compact in structure, convenient to take over, and connected by bus.
10 electronic control system
Electrical control system: Taiwan Delta CNC seven axis controller.
The use of horizontal line with the international professional movement control system, you can achieve multi axis synchronous motion, the realization of complex shear requirements; user-friendly interface design, easy to use, more powerful.
To meet the shear function: Universal shear mode: three laminations
Horizontal step: 3 step, 5 step, the 7 step shear mode
Vertical step: 3 step, 5 step, the 7 step shear mode
Special increase: shear optimization and material saving function.
It can meet the latest design of oil transformer, dry-type transformer, reactor manufacturing process.
The main technical parameters of the production line
1 processing range
Slice thickness: 0.23-0.35mm
Width: 100-640mm
Length: 600-3500mm
2 requirements for the coil used in the production line:
Width tolerance: + 0.1mm
Burr: less than 0.03mm
S: deviation within 2000mm one-way 0.2mm
3 accuracy of the production line:
Length tolerance: + 0.2mm
Angle tolerance: + 0.05
Burr: less than 0.05mm
4 feeding speed: work feeding speed 120m/min
5 tool life: not less than 1 million times (once every blade)
6 total installed capacity: about 35Kw
7 total gas consumption: 0.3 m3 / min
8 working conditions:
(1) the temperature is not higher than 40 DEG C; (2) the voltage fluctuation is 380V + / - 10%; (3) frequency 50Hz
9 with lateral stepping function
10 operating direction: right line (from the main console side of the device, feeding direction from right to left).

 

分享到:
Hits:  UpdateTime:2017-03-22 16:43:01