Electric two cutter and V notch CTL

Automatic cut two blunt silicon steel sheet two step type transverse shear line

Automatic cut two blunt silicon steel sheet two step type transverse shear line

Detailed

CAH (22) - 400 type d transverse shear line
1. Double head uncoiler
Coil diameter: 500 mm
The biggest diameter: 1200 mm
Single head weight: 2 tons
Open book speed: over feeding synchronous adjustment
Uncoiling machine adopts synchronous stepless speed regulation with feeding, hydraulic tensioning, motor rotation.
2. The feed buffer device
With no pit (pit) transferring feed buffer, ranging system, position switch, etc.
3. The feeder
Upper and lower feed roller and measuring roller, feed roller drive system adopts the Siemens motor control system. Motor drive, adopts the most advanced servo push-pull institution; The encoder measuring, servo closed-loop control; Feed roller adopts polyurethane, 0-180 m/min, normal use highest send LiaoDu 240 m/min;
4. Press section O
Using my company's patent for utility model technology, ductile cast iron batch casting, eliminate stress after one-off use five axis machining center processing molding;
Adopt imported square linear guide; O blunt shear driven by servo motor, high efficiency, low noise.
Knife (die) using cemented carbide cutting tools, grinding every use should not less than 500000 times.
5. V press section
Using my company's patent for utility model technology, ductile cast iron batch casting, eliminate stress after one-off use five axis machining center processing molding;
Adopt imported square linear guide; At short range: along the sheet stock center + 50 mm, V punching shear driven by servo motor, high efficiency, low noise.
Knife (die) using cemented carbide cutting tools, grinding every use should not less than 1 million times.
V longitudinal adopt servo motor movement.
6. The shear section
Using my company's patent for utility model technology, ductile cast iron batch casting, eliminate stress after one-off use five axis machining center processing molding; The other imported square linear guide;
Shear section includes: + 45 ° shears, - 45 ° shears, transverse sliding table, discharging roll, etc.
Shear driven by servo motor, high efficiency, low noise.
Knife (die) using cemented carbide cutting tools, grinding every use should not less than 1 million times.
7. Wide focus adjustment device
Broadly based on unilateral positioning manual focus is set wide operation mode to adapt to the different width sheet stock transfer.
Adjustable wide body adopts the ball screw drive a fully-fledged linkage concentration adjustable wide wide.
Wide adjustable device plus plugging material alarm device, when the material arching implement the suspended state.
8. Correction device
High speed shearing materials in the process of automatic correction. Adopt pneumatic way to implement this functionality. Installation position on both sides of V rushed and shears.
9. The loading
Unilateral positioning, stepless speed transmission belt, discharging smoothly. Discharging motor adopts ABB motor, Toshiba inverter control.
10. Sorting machine
Can complete upper and lower two layers of bedding materials respectively, mainly by the fragmentation devices, transmission belt and magnetic material of first class.
11. Unilateral position device electric centralized adjustable width
Broadly based on unilateral positioning electric centralized adjustable wide operation mode to adapt to the different width sheet stock transfer.
Adjustable wide organization adopt linear guide, ball screw transmission ways.
Across the wide linkage concentration adjustable width, position indicator display position.
12. The pneumatic system
All pneumatic system adopts pneumatic auxiliary control system, the structure is compact, easy to take over, bus connection.
Electric control system of 13.
Electronic control system includes the main electric control cabinet and work station.
2. The product line is the main technical parameters:
1. The processing range:
Thickness: 0.23-0.35 mm ‌
Wide: 45-430 - mm
Length: 400-2500 mm
2. This production line used by the coil material requirements:
The width tolerance: + / - 0.1 mm
MAO thorn: 0.03 mm or less
S: of the deviation in one-way within 2000 mm of 0.2 mm or less
Material wave degrees: local wave height of 1 mm or less
Material shall have no rusty spot, thickness deviation of 0.02 mm or less
3. The precision production line:
The length tolerance: + / - 0.2 mm
Angle tolerance: + / - 0.025 °
MAO thorn: 0.02 mm or less
4. The feeding speed, working feed speed 150 m/min
5. The knives' service life: horizontal scissors with not less than 1 million times (once every grinding); Hard alloy material
V scissors with not less than 800000 times (once every grinding); Hard alloy material
O impact abrasive is not less than 500000 times. Each time (grinding); Hard alloy material
6. The total installed capacity: about 27 kw
7. The total gas consumption: 0.2 cubic meters per minute
8. The working conditions:
(1) the temperature is not higher than 40 ° C; (2) voltage fluctuation to 380 v + 10%; (3) the frequency of 50 hz
10. Has the vertical step function
11. Operating direction: right line (from one side of main work station for equipment, feed direction from left to right).
12. Meet the shear type: ordinary type: edge, equilateral stele, unequal stele, yoke
Lateral step 3, step 5, 7 step by step
Longitudinal 3 step by step, step 5, 7 step by step
3. Key components list
分享到:
Hits:  UpdateTime:2017-03-28 16:07:10