CAH (22) - 300 type d transverse shear line
1. The single head machine
Single-end feeding machine, the load of 2 tons.
Toshiba inverter, infrared detection automatically after feeding.
The feeding width: 40-320 - mm; Diameter range: 480-520 - mm.
When tight way: hydraulic oil cylinder up tight.
Frame adopts steel plate welding structure, an open-book head spindle mounted in ball bearings, shaft with the curved plate, with a rotating cylinder drive screw plate opening and closing. Feeding speed adopts the automatic detection of infrared ray tracing, hydraulic drive screw up tight.
2. The feed buffer device
Adopting pit material buffer, ranging system, position switch, etc.
3. The feeder
Upper and lower feed roller and measuring roller, feed roller drive system adopts CNC control system. For servo motor driver, encoder measuring, servo closed-loop control; Feed roller adopts polyurethane, 0-120 m/min, normal use the highest feed speed 180 m/min.
4. Press section (a total of four sets of servo motor)
Mainly include O punch and a v-shaped punch set, each set's two sets of servo motor drive.
O and V impact and have horizontal and vertical step function, automatically adjust according to the program. At short range: along the sheet stock center + 50 mm, step into a series of seven.
O press and v-shaped punch used for servo motor driven CAM work to shear, high efficiency, low noise. The knives' service life: not less than 1 million times (once every grinding) : cemented carbide materials. Die life: not less than 20-300000 times (once every grinding) : cemented carbide materials.
5. The shear section (a total of two sets of servo motor)
Shear blade for nodular cast iron, good mechanical performance, bending, and resistance to deformation.
Mainly by the + 45 ° shears, - 45 ° shears, transverse sliding table, discharging roll, etc.
Shear way: using the servo motor drive along the precision linear guide rail sliding CAM mechanism, and work to shear.
Knife (die) with life: every grinding is not less than 1 million for the first time, cutting tool material for cemented carbide.
6. The loading
Unilateral positioning, stepless speed transmission belt, discharging smoothly.
Discharging motor adopts ABB motor, Toshiba inverter control.
7. Sorting machine
Can complete two layer pressure stacked reinforced structure material respectively, mainly by the fragmentation devices, transmission belt and magnetic material of first class.
8. Unilateral positioning the automatic tuning device wide
Broadly based on unilateral positioning the automatic tuning wide operation mode to adapt to the different width sheet stock transfer.
Adjustable wide institutions with linear guide (ABBA) guide and ball screw transmission ways.
Across the wide linkage concentration adjustable width, position indicator display position.
Pneumatic system is 9.
All pneumatic system adopts Taiwan AIRTAC pneumatic control system, the structure is compact, easy to take over, bus connection.
Electric control system of 10.
Electronic control system includes the main electric control cabinet and work station.
2. The product line is the main technical parameters:
1. The processing range:
Thickness: 0.23-0.35 mm
Wide: 40-320 - mm (normal form)
60-300 - mm (step shape)
Length: 400-2000 - mm (length from the center line)
Punching diameter: 8 - Ø Ø 24 mm
2. This production line used by the coil material requirements:
The width tolerance: + / - 0.1 mm
MAO thorn: 0.03 mm or less
S: of the deviation in one-way within 2000 mm of 0.2 mm or less
3. The precision production line:
The length tolerance: + / - 0.2 mm / 2 m
Angle tolerance: + / - 0.025 °
MAO thorn: 0.02 mm or less
4. The feeding speed, working feed speed 150 m/min
5. The knives' service life: each grinding is not less than 1 million for the first time, tungsten carbide material
Die life: not less than 20-300000 times (once every grinding) : cemented carbide materials.
6. The total installed capacity: about 16 kw
7. The total gas consumption: 1 cubic meters per minute
8. The working conditions:
(1) the temperature is not higher than 40 ° C; (2) voltage fluctuation to 380 v + 10%; (3) the frequency of 50 hz
9. With vertical and horizontal three, five, seven step function
10. Operating direction: right line (from one side of main work station for equipment, feed direction from left to right).
11, the machine installation dimensions: length X width X height: 12 m X 3.5 m X 2 m